銆愭ǎ鍐奝65銆慥ibration analysis of water pump

涓婃捣娣炴睙娓涢渿鍣ㄩ泦鍦�(tu谩n)鏈夐檺鍏�鍙稿畼鏂圭��(w菐ng)绔欓浕瀛愭ǎ鍐婃瑒鐩�鐐烘偍浠嬬垂锛氥�愭ǎ鍐奝65銆慥ibration analysis of water pump淇℃伅锛屾窞姹熼泦鍦�(tu谩n)鐐虹溇澶氭槦绱氶厭搴楁彁渚涢珮鍝佽唱(zh矛)娓涙尟闄嶅櫔瑙ｆ焙鏂规�堛��

Urban construction tends to high level, people's living with water will need to be promoted, air conditioning chilled water, cooling water circulation system pump use more and more widely. However, thenoise and vibration caused by the problem of the environment are also put forward to control and protection. Leading to a unit and the pumping station building to produce vibration caused by many reasons, some factors between both interrelated and interact with each other. And briefly, mainly thefollowing four aspects.
1, electrical aspects
Motor is the main equipment of the unit, the internal magnetic force of the motor and other electrical systems, often caused by vibration and noise.
2, mechanical aspects
Motor and pump rotation parts quality imbalance, shoddy, installation of poor quality, asymmetric unit axis, a swing degree exceeds the allowable value, parts of mechanical strength and poor stiffness, bearing and sealing parts wear and damage, and the critical speed of the pump appears and the natural frequency of the unit rate difference caused by the resonance etc., will produce strong vibration and noise.
3, hydraulic aspects
Pump inlet velocity and pressure distribution is not uniform pump import and export liquid pressure pulsation, liquid flow around and drift and flow separation, non fixed conditions and a variety of
causes for pump gas turbidity are a common cause of the vibration of the pump unit. Pump start and shutdown, the valves open and close, changing working condition and accident emergency stop dynamic transition process caused by pipeline the rapid change of the pressure and the water hammer effect, often lead to vibration of the pump and crew.
4, water workers and other aspects
Set inlet flow design unreasonable or does not match with the unit, a water pump submerged depth properly, and the unit startup and shutdown order is not reasonable etc., so that the deterioration
of water conditions, vortices, induced air turbidity or aggravate unit and pump vibration. The damage siphon vacuum drying unit in startup, if hump section of the air entrainment difficult to form a long
siphon; beat the door cutout of the unit take door design unreasonable, open and closed, continue to impact the flap valve seat; foundation to support the pump and motor occurred uneven settlement or
foundation of rigid poor reasons, will also lead to unit vibration. From this, we can get the conclusion: the vibration of the water pump is very many, many of which are inevitable. And in fact,whether from the design of the production link, or hydraulic design, can not completely eliminate the vibration of the pump.Therefore, it is very important to implement the vibration isolation of the water pump through the installation of inertia base and the spring vibration isolator and the rubber isolator.

浠ヤ笂銆愭ǎ鍐奝65銆慥ibration analysis of water pump淇℃伅渚嗘簮浜庝笂娴锋窞姹熸笡闇囧櫒闆嗗湗(tu谩n)鏈夐檺鍏�鍙稿畼鏂圭��(w菐ng)绔欙紝濡傞渶浜嗚В鏇村�氭笡鎸�淇℃伅璜嬮粸(di菐n)鎿婏細褰堢哀娓涢渿鍣�鏌ヨ��锛屾�¤繋鏂拌�佸�㈡埗鍒版垜寤犲��(sh铆)鍦板弮瑙�鑰冨療锛岄浕瑭憋細021-33666667銆�